wet time meaning in Chinese
湿时间
Examples
- Methods for analysis of dried milk and dried milk products - determination of the dispersibility and the wetting time of instant dried milk
奶粉和奶粉制品的分析方法.第4部分:速溶奶粉的可分散性和浸湿时间的测定 - When the bath temperature is 90 and nah2po2 h2o concentration is more than 80g / l , wetting time prolongs instead and solderability decreases
镀液温度为90oc时，次亚磷酸钠用量超过809几后，润湿i时间反而增长，可焊性下降。 - When the bath temperature is at 70 and 801 : , wetting time of the deposits shortened as the nah2po2 h2o concentration increases , and solderability improves
镀液温度在70t和80 ’ c时，镀层润湿时间随次亚磷酸钠浓度的增加而缩短，可焊性提高。 - Items for sanitary and domestic use . single - use diapers , nappies , sanitary napkins and similar products . determination of wetting time of protective non - wowen layers
卫生和家庭用品.专用擦手纸.尿布和卫生纸及类似产品.非织物护层湿透时间测定 - The experiment result discovered the grafting effect of crylic acid and acrylamide were obvious which can be proved by the sem photoes . by the ft - ir testing of the grafted uhmwpe fabric , we discovered that some new polar groups were introduced to the surface . then by the dynamic wetting experiment of the grafted uhmwpe fabric , we concluded that the wetting time was a parabola relation with the graft ratio and the wetting time of the grafted uhmwpe fabric was less than that of untreated fabric . the results showed that after the coradiation grafting , uhmwpe fiber ' s surficial nonreactivity could be improved effectively
通过对接枝uhmwpe织物的红外光谱分析，发现其表面引入了许多新的极性基团。最后运用了纤维动态浸润性分析了接枝后的效果，得到所测浸润稳定时间与接枝率成抛物线关系，而且接枝样品的浸润稳定时间都比未处理样品的浸润稳定时间小些，这说明了共辐照接枝的方法可以有效地改善uhmwpe纤维表面惰性，达到uhmwpe纤维表面改性的目的。